This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1740361671 | 128 Count | 436 Count | 0 Count | 4.28 VDC | 0.32 VDC |
| 1740359872 | 127 Count | 418 Count | 0 Count | 4.28 VDC | 0.32 VDC |
| 1740358073 | 126 Count | 399 Count | 0 Count | 4.28 VDC | 0.32 VDC |
| 1740356273 | 125 Count | 381 Count | 0 Count | 4.28 VDC | 0.32 VDC |
| 1740354473 | 124 Count | 363 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740352675 | 123 Count | 345 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740350875 | 122 Count | 328 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740349076 | 121 Count | 310 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740347276 | 120 Count | 292 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740345477 | 119 Count | 273 Count | 0 Count | 4.29 VDC | 0.32 VDC |
| 1740343677 | 118 Count | 228 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740341877 | 117 Count | 210 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740340079 | 116 Count | 192 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740338279 | 115 Count | 174 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740336480 | 114 Count | 156 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740334681 | 113 Count | 138 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740332881 | 112 Count | 120 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740331082 | 111 Count | 102 Count | 0 Count | 4.3 VDC | 0.32 VDC |
| 1740329283 | 110 Count | 84 Count | 0 Count | 4.31 VDC | 0.32 VDC |
| 1740325685 | 104 Count | 45 Count | 0 Count | 4.32 VDC | 5.5 VDC |
| 1740325652 | 98 Count | 45 Count | 0 Count | 4.31 VDC | 6.02 VDC |
| 1740325622 | 91 Count | 42 Count | 0 Count | 4.32 VDC | 6.02 VDC |
| 1740325581 | 85 Count | 42 Count | 0 Count | 4.31 VDC | 5.84 VDC |
| 1740325524 | 76 Count | 37 Count | 0 Count | 4.32 VDC | 4.5 VDC |
| 1740325484 | 70 Count | 37 Count | 0 Count | 4.32 VDC | 4.84 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)