This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | current* | temp* | humidity* | v batt* | v cpu* |
|---|---|---|---|---|---|
| 1740325686 | 2.46 mA | 0 C | 99 % | 1.27 V | 3.28 V |
| 1740324766 | 1.73 mA | 0 C | 99 % | 1.27 V | 3.28 V |
| 1740323845 | 1.4 mA | 1 C | 99 % | 1.25 V | 3.26 V |
| 1740322924 | 1.57 mA | 1 C | 90 % | 1.27 V | 3.28 V |
| 1740322187 | 2.28 mA | 2 C | 75 % | 1.27 V | 3.28 V |
| 1740322003 | 1.08 mA | 2 C | 73 % | 1.27 V | 3.28 V |
| 1740321082 | 1.88 mA | 3 C | 63 % | 1.29 V | 3.28 V |
| 1740320161 | 1.54 mA | 3 C | 63 % | 1.29 V | 3.28 V |
| 1740316477 | 1.15 mA | 3 C | 60 % | 1.29 V | 3.28 V |
| 1740316228 | 1.43 mA | 2 C | 59 % | 1.29 V | 3.28 V |
| 1740314635 | 1.44 mA | 2 C | 59 % | 1.29 V | 3.28 V |
| 1740313714 | 1.43 mA | 2 C | 59 % | 1.29 V | 3.28 V |
| 1740312794 | 1.63 mA | 2 C | 58 % | 1.29 V | 3.28 V |
| 1740311873 | 1.76 mA | 3 C | 57 % | 1.29 V | 3.28 V |
| 1740310952 | 2.34 mA | 3 C | 57 % | 1.29 V | 3.28 V |
| 1740309110 | 1.32 mA | 3 C | 56 % | 1.29 V | 3.28 V |
| 1740308189 | 1.46 mA | 3 C | 55 % | 1.29 V | 3.28 V |
| 1740307268 | 2.84 mA | 3 C | 55 % | 1.29 V | 3.28 V |
| 1740306347 | 1.37 mA | 3 C | 54 % | 1.29 V | 3.28 V |
| 1740305426 | 1.3 mA | 4 C | 53 % | 1.32 V | 3.28 V |
| 1740304505 | 1.66 mA | 4 C | 52 % | 1.32 V | 3.28 V |
| 1740303583 | 1.18 mA | 4 C | 52 % | 1.32 V | 3.28 V |
| 1740301741 | 1.26 mA | 4 C | 53 % | 1.32 V | 3.28 V |
| 1740300820 | 0.96 mA | 3 C | 54 % | 1.29 V | 3.28 V |
| 1740299899 | 1.65 mA | 3 C | 54 % | 1.29 V | 3.28 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)