This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749240487 | 32 Count | 101 Count | 29 Count | 4.09 VDC | 0 VDC |
| 1749238689 | 23 Count | 71 Count | 21 Count | 4.09 VDC | 0 VDC |
| 1749236890 | 15 Count | 36 Count | 14 Count | 4.1 VDC | 1.66 VDC |
| 1749233295 | 339 Count | 1005 Count | 289 Count | 4.1 VDC | 5.54 VDC |
| 1749231496 | 330 Count | 989 Count | 281 Count | 4.1 VDC | 5.52 VDC |
| 1749229699 | 314 Count | 962 Count | 267 Count | 4.1 VDC | 5.54 VDC |
| 1749227901 | 277 Count | 890 Count | 236 Count | 4.1 VDC | 5.54 VDC |
| 1749226102 | 269 Count | 871 Count | 229 Count | 4.1 VDC | 5.54 VDC |
| 1749224304 | 252 Count | 837 Count | 213 Count | 4.1 VDC | 5.54 VDC |
| 1749222507 | 243 Count | 821 Count | 205 Count | 4.1 VDC | 5.54 VDC |
| 1749217118 | 220 Count | 781 Count | 185 Count | 4.11 VDC | 5.56 VDC |
| 1749217108 | 215 Count | 781 Count | 185 Count | 4.11 VDC | 5.56 VDC |
| 1749215310 | 208 Count | 750 Count | 179 Count | 4.11 VDC | 5.56 VDC |
| 1749213511 | 201 Count | 721 Count | 173 Count | 4.11 VDC | 5.56 VDC |
| 1749211711 | 193 Count | 687 Count | 166 Count | 4.11 VDC | 5.56 VDC |
| 1749209912 | 186 Count | 644 Count | 160 Count | 4.12 VDC | 5.56 VDC |
| 1749208114 | 179 Count | 597 Count | 154 Count | 4.12 VDC | 5.54 VDC |
| 1749206316 | 172 Count | 556 Count | 148 Count | 4.12 VDC | 5.56 VDC |
| 1749204516 | 165 Count | 532 Count | 142 Count | 4.12 VDC | 5.56 VDC |
| 1749202718 | 159 Count | 507 Count | 137 Count | 4.12 VDC | 5.56 VDC |
| 1749200920 | 150 Count | 480 Count | 129 Count | 4.13 VDC | 5.56 VDC |
| 1749199121 | 142 Count | 454 Count | 122 Count | 4.13 VDC | 5.56 VDC |
| 1749197321 | 135 Count | 423 Count | 116 Count | 4.13 VDC | 5.54 VDC |
| 1749195523 | 128 Count | 396 Count | 110 Count | 4.13 VDC | 5.54 VDC |
| 1749193725 | 120 Count | 373 Count | 103 Count | 4.13 VDC | 5.54 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)