This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1746072871 | 23 Count | 453 Count | 0 Count | 4.2 VDC | 4.32 VDC |
| 1746071073 | 22 Count | 439 Count | 0 Count | 4.19 VDC | 4.34 VDC |
| 1746069273 | 21 Count | 426 Count | 0 Count | 4.19 VDC | 3.12 VDC |
| 1746067473 | 20 Count | 412 Count | 0 Count | 4.19 VDC | 0.12 VDC |
| 1746065674 | 19 Count | 398 Count | 0 Count | 4.19 VDC | 0.12 VDC |
| 1746063874 | 18 Count | 383 Count | 0 Count | 4.19 VDC | 0.12 VDC |
| 1746062076 | 17 Count | 368 Count | 0 Count | 4.19 VDC | 0.12 VDC |
| 1746060276 | 16 Count | 355 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746058477 | 15 Count | 347 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746056677 | 14 Count | 337 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746054880 | 13 Count | 323 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746053081 | 12 Count | 307 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746049482 | 10 Count | 280 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746047683 | 9 Count | 266 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1746045884 | 8 Count | 252 Count | 0 Count | 4.21 VDC | 0.12 VDC |
| 1746044085 | 7 Count | 218 Count | 0 Count | 4.21 VDC | 0.12 VDC |
| 1746042286 | 6 Count | 149 Count | 0 Count | 4.21 VDC | 0.12 VDC |
| 1746040486 | 5 Count | 80 Count | 0 Count | 4.21 VDC | 0.12 VDC |
| 1746038687 | 4 Count | 67 Count | 0 Count | 4.22 VDC | 0.12 VDC |
| 1746036888 | 3 Count | 54 Count | 0 Count | 4.22 VDC | 3.72 VDC |
| 1746035088 | 2 Count | 40 Count | 0 Count | 4.22 VDC | 5.28 VDC |
| 1746033289 | 1 Count | 26 Count | 0 Count | 4.22 VDC | 5.28 VDC |
| 1746031489 | 0 Count | 14 Count | 0 Count | 4.23 VDC | 5.3 VDC |
| 1746029691 | 68 Count | 1011 Count | 0 Count | 4.23 VDC | 5.3 VDC |
| 1746027891 | 67 Count | 997 Count | 0 Count | 4.23 VDC | 5.3 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)