This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773871981 | 3.62 VDC | 0 VDC | 0 | 0 | 0 |
| 1773871081 | 3.64 VDC | 0 VDC | 0 | 0 | 0 |
| 1773870180 | 3.66 VDC | 0 VDC | 0 | 0 | 0 |
| 1773869279 | 3.67 VDC | 0 VDC | 0 | 0 | 0 |
| 1773868378 | 3.68 VDC | 0 VDC | 0 | 0 | 0 |
| 1773867477 | 3.7 VDC | 0 VDC | 0 | 0 | 0 |
| 1773866576 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1773865675 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1773864775 | 3.74 VDC | 0 VDC | 0 | 0 | 0 |
| 1773863874 | 3.75 VDC | 0 VDC | 0 | 0 | 0 |
| 1773862973 | 3.77 VDC | 0 VDC | 0 | 0 | 0 |
| 1773862072 | 3.78 VDC | 0 VDC | 0 | 0 | 0 |
| 1773861172 | 3.79 VDC | 0 VDC | 0 | 0 | 0 |
| 1773860271 | 3.8 VDC | 0 VDC | 0 | 0 | 0 |
| 1773859370 | 3.82 VDC | 0 VDC | 0 | 0 | 0 |
| 1773858469 | 3.83 VDC | 0 VDC | 0 | 0 | 0 |
| 1773857568 | 3.85 VDC | 0 VDC | 0 | 0 | 0 |
| 1773856667 | 3.85 VDC | 0 VDC | 0 | 0 | 0 |
| 1773855766 | 3.88 VDC | 0 VDC | 0 | 0 | 0 |
| 1773854866 | 3.9 VDC | 0 VDC | 0 | 0 | 0 |
| 1773853965 | 3.9 VDC | 0 VDC | 0 | 0 | 0 |
| 1773853064 | 3.9 VDC | 0 VDC | 0 | 0 | 0 |
| 1773852163 | 3.93 VDC | 0 VDC | 0 | 0 | 0 |
| 1773850361 | 3.95 VDC | 0 VDC | 0 | 0 | 0 |
| 1773849460 | 3.96 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)