This is the latest recevied telemetry packets stored in our database for station/object SP9BJV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | current* | temp* | humidity* | v batt* | v cpu* |
---|---|---|---|---|---|
1726780857 | 0.05 mA | 11 C | 87 % | 0.16 V | 3.61 V |
1726779943 | 0.02 mA | 11 C | 86 % | 0.16 V | 3.61 V |
1726779028 | 0.02 mA | 12 C | 84 % | 0.16 V | 3.61 V |
1726778113 | 0.02 mA | 12 C | 84 % | 0.16 V | 3.61 V |
1726777199 | 0.02 mA | 12 C | 85 % | 0.16 V | 3.61 V |
1726776284 | 0.02 mA | 12 C | 88 % | 0.16 V | 3.61 V |
1726775370 | 0.02 mA | 12 C | 89 % | 0.16 V | 3.61 V |
1726774466 | 0.02 mA | 12 C | 88 % | 0.14 V | 3.53 V |
1726772626 | 0.02 mA | 12 C | 85 % | 0.16 V | 3.61 V |
1726771711 | 0.02 mA | 12 C | 81 % | 0.16 V | 3.61 V |
1726770796 | 0.02 mA | 13 C | 74 % | 0.16 V | 3.61 V |
1726770111 | 0.8 mA | 13 C | 73 % | 0.16 V | 3.58 V |
1726768966 | 0.08 mA | 13 C | 66 % | 0.16 V | 3.61 V |
1726768280 | 0.8 mA | 14 C | 62 % | 0.16 V | 3.55 V |
1726768051 | 0.02 mA | 14 C | 62 % | 0.16 V | 3.61 V |
1726767363 | 0.99 mA | 14 C | 60 % | 0.16 V | 3.59 V |
1726766219 | 0.02 mA | 15 C | 58 % | 0.19 V | 3.62 V |
1726765303 | 0.02 mA | 16 C | 57 % | 0.19 V | 3.62 V |
1726764387 | 0.02 mA | 17 C | 53 % | 0.19 V | 3.62 V |
1726763470 | 0.02 mA | 17 C | 49 % | 0.19 V | 3.62 V |
1726761636 | 0.02 mA | 19 C | 44 % | 0.19 V | 3.62 V |
1726760718 | 0.02 mA | 20 C | 42 % | 0.19 V | 3.62 V |
1726759810 | 0.02 mA | 21 C | 39 % | 0.16 V | 3.48 V |
1726758715 | 0.05 mA | 24 C | 27 % | 0.19 V | 3.61 V |
1726756532 | 0.99 mA | 24 C | 27 % | 0.19 V | 3.61 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)