This is the latest recevied telemetry packets stored in our database for station/object SP2ATJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773873913 | 3.61 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773872112 | 3.67 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773870310 | 3.7 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773869409 | 3.69 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773868509 | 3.72 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773867608 | 3.74 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773866708 | 3.74 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773864005 | 3.8 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773861302 | 3.86 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773860401 | 3.87 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773859500 | 3.89 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773858599 | 3.9 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773857699 | 3.91 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773856798 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773855897 | 3.94 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773854996 | 3.96 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773854096 | 3.95 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773853195 | 4 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773852294 | 4.01 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773851394 | 4.01 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773850493 | 4.04 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773849592 | 4.03 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773848691 | 4.28 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773848673 | 4.28 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1773848658 | 4.28 VDC | 0.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)