This is the latest recevied telemetry packets stored in our database for station/object IZ5HQB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765204202 | 4.2 VDC | 12.28 VDC | 0 | 0 | 0 |
| 1765203302 | 4.21 VDC | 12.32 VDC | 0 | 0 | 0 |
| 1765201504 | 4.21 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1765200600 | 4.21 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1765199700 | 4.2 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1765198800 | 4.22 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1765197900 | 4.21 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1765197000 | 4.22 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1765196100 | 4.21 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1765195202 | 4.22 VDC | 14.7 VDC | 0 | 0 | 0 |
| 1765194298 | 4.22 VDC | 12.9 VDC | 0 | 0 | 0 |
| 1765193398 | 4.23 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765192498 | 4.22 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765191598 | 4.22 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1765190698 | 4.22 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1765189797 | 4.22 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765188897 | 4.21 VDC | 12.9 VDC | 0 | 0 | 0 |
| 1765187997 | 4.23 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765187097 | 4.23 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765186197 | 4.19 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1765185304 | 4.22 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1765184397 | 4.23 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765183497 | 4.22 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1765182597 | 4.22 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1765181697 | 4.23 VDC | 12.78 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)