This is the latest recevied telemetry packets stored in our database for station/object IR2UDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732453527 | 0.53 VDC | 1 VDC | 0 | 0 | 0 |
| 1732452627 | 0.52 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1732451726 | 0.45 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1732450826 | 0.49 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1732449926 | 0.54 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1732449026 | 0.54 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1732448126 | 0.54 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1732447226 | 0.47 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1732446326 | 0.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1732446303 | 0.4 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1732446158 | 0.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1732446059 | 0.41 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1732445415 | 0.4 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1732445408 | 0.4 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1732445313 | 0.28 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1732444768 | 0.38 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732443868 | 0.4 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732442968 | 0.41 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732442068 | 0.41 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732441167 | 0.41 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732440267 | 0.28 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1732439367 | 0.4 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732438467 | 0.4 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732437567 | 0.41 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1732436667 | 0.41 VDC | 0.96 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)