This is the latest recevied telemetry packets stored in our database for station/object DO1HFS-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753154968 | 4.9 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753154068 | 4.97 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753153168 | 4.97 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753152268 | 4.9 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753151368 | 4.97 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753150468 | 4.98 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753149567 | 4.98 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753148667 | 4.9 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1753147767 | 4.9 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1753146867 | 4.97 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753145967 | 4.88 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1753145067 | 4.91 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753144167 | 4.82 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753143267 | 4.78 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1753142367 | 4.8 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753141468 | 4.88 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753140568 | 4.96 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1753139667 | 4.97 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753138767 | 4.9 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753137867 | 4.97 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1753136967 | 4.89 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753136067 | 4.97 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753135167 | 4.97 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1753134267 | 4.81 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1753133367 | 4.85 VDC | 0.78 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)