This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761289608 | 307 Count | 391 Count | 111 Count | 4.13 VDC | 4.28 VDC |
| 1761289308 | 305 Count | 389 Count | 110 Count | 4.13 VDC | 4.28 VDC |
| 1761289008 | 304 Count | 389 Count | 110 Count | 4.13 VDC | 4.28 VDC |
| 1761288708 | 302 Count | 386 Count | 109 Count | 4.13 VDC | 4.28 VDC |
| 1761288407 | 301 Count | 386 Count | 109 Count | 4.13 VDC | 4.28 VDC |
| 1761288107 | 299 Count | 384 Count | 108 Count | 4.13 VDC | 4.28 VDC |
| 1761287807 | 297 Count | 380 Count | 107 Count | 4.13 VDC | 4.3 VDC |
| 1761287507 | 296 Count | 380 Count | 107 Count | 4.13 VDC | 4.3 VDC |
| 1761287206 | 295 Count | 380 Count | 107 Count | 4.13 VDC | 4.3 VDC |
| 1761286906 | 292 Count | 375 Count | 105 Count | 4.13 VDC | 4.3 VDC |
| 1761286606 | 291 Count | 375 Count | 105 Count | 4.13 VDC | 4.3 VDC |
| 1761286306 | 289 Count | 373 Count | 104 Count | 4.13 VDC | 4.32 VDC |
| 1761286006 | 288 Count | 371 Count | 104 Count | 4.13 VDC | 2.32 VDC |
| 1761285706 | 286 Count | 369 Count | 103 Count | 4.13 VDC | 0.7 VDC |
| 1761285406 | 285 Count | 369 Count | 103 Count | 4.13 VDC | 0.08 VDC |
| 1761285106 | 283 Count | 366 Count | 102 Count | 4.13 VDC | 0.24 VDC |
| 1761284806 | 281 Count | 364 Count | 101 Count | 4.13 VDC | 0 VDC |
| 1761284506 | 279 Count | 361 Count | 100 Count | 4.13 VDC | 0.82 VDC |
| 1761284207 | 278 Count | 360 Count | 100 Count | 4.13 VDC | 0 VDC |
| 1761283907 | 277 Count | 360 Count | 100 Count | 4.13 VDC | 0 VDC |
| 1761283607 | 276 Count | 360 Count | 100 Count | 4.13 VDC | 0 VDC |
| 1761283307 | 273 Count | 355 Count | 98 Count | 4.13 VDC | 0 VDC |
| 1761283006 | 272 Count | 355 Count | 98 Count | 4.13 VDC | 0 VDC |
| 1761282707 | 271 Count | 354 Count | 98 Count | 4.13 VDC | 0 VDC |
| 1761282407 | 270 Count | 353 Count | 98 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)