This is the latest recevied telemetry packets stored in our database for station/object IK2EXH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753187574 | 89 Pkt/10m | 39 Pkt/10m | 3.72 Volt | 0 | 0 |
| 1753184031 | 94 Pkt/10m | 47 Pkt/10m | 3.59 Volt | 0 | 0 |
| 1753180486 | 73 Pkt/10m | 50 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1753176941 | 73 Pkt/10m | 47 Pkt/10m | 3.49 Volt | 0 | 0 |
| 1753173397 | 85 Pkt/10m | 62 Pkt/10m | 3.37 Volt | 0 | 0 |
| 1753169853 | 80 Pkt/10m | 59 Pkt/10m | 3.53 Volt | 0 | 0 |
| 1753166309 | 99 Pkt/10m | 54 Pkt/10m | 3.23 Volt | 0 | 0 |
| 1753162764 | 0 Pkt/10m | 0 Pkt/10m | 2.92 Volt | 0 | 0 |
| 1753149707 | 1 Pkt/10m | 1 Pkt/10m | 3 Volt | 0 | 0 |
| 1753146134 | 113 Pkt/10m | 19 Pkt/10m | 3.04 Volt | 0 | 0 |
| 1753142589 | 128 Pkt/10m | 39 Pkt/10m | 3.1 Volt | 0 | 0 |
| 1753139044 | 90 Pkt/10m | 31 Pkt/10m | 3.14 Volt | 0 | 0 |
| 1753135500 | 44 Pkt/10m | 35 Pkt/10m | 3.18 Volt | 0 | 0 |
| 1753131955 | 44 Pkt/10m | 36 Pkt/10m | 3.19 Volt | 0 | 0 |
| 1753128413 | 70 Pkt/10m | 49 Pkt/10m | 3.19 Volt | 0 | 0 |
| 1753124866 | 57 Pkt/10m | 47 Pkt/10m | 3.27 Volt | 0 | 0 |
| 1753121323 | 61 Pkt/10m | 49 Pkt/10m | 3.33 Volt | 0 | 0 |
| 1753117778 | 76 Pkt/10m | 64 Pkt/10m | 3.37 Volt | 0 | 0 |
| 1753114233 | 53 Pkt/10m | 40 Pkt/10m | 3.41 Volt | 0 | 0 |
| 1753110689 | 59 Pkt/10m | 47 Pkt/10m | 3.43 Volt | 0 | 0 |
| 1753107145 | 53 Pkt/10m | 43 Pkt/10m | 3.51 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)