This is the latest recevied telemetry packets stored in our database for station/object IW2DFH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755782779 | 14 Pkt/10m | 13 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755779234 | 15 Pkt/10m | 15 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755775690 | 4 Pkt/10m | 4 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755772146 | 15 Pkt/10m | 11 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755768602 | 8 Pkt/10m | 8 Pkt/10m | 3.84 Volt | 0 | 0 |
| 1755765058 | 14 Pkt/10m | 14 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755761513 | 12 Pkt/10m | 12 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755757969 | 4 Pkt/10m | 4 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755754425 | 10 Pkt/10m | 10 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1755750881 | 8 Pkt/10m | 8 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755747336 | 13 Pkt/10m | 13 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755743792 | 14 Pkt/10m | 14 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755740248 | 8 Pkt/10m | 8 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755736704 | 8 Pkt/10m | 8 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755733160 | 11 Pkt/10m | 11 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755729616 | 15 Pkt/10m | 15 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755726071 | 30 Pkt/10m | 22 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755722527 | 0 Pkt/10m | 0 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755718983 | 0 Pkt/10m | 0 Pkt/10m | 3.76 Volt | 0 | 0 |
| 1755715439 | 28 Pkt/10m | 25 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755711895 | 34 Pkt/10m | 33 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755708350 | 51 Pkt/10m | 48 Pkt/10m | 3.82 Volt | 0 | 0 |
| 1755704806 | 32 Pkt/10m | 27 Pkt/10m | 3.78 Volt | 0 | 0 |
| 1755701262 | 0 Pkt/10m | 0 Pkt/10m | 3.8 Volt | 0 | 0 |
| 1755700583 | 54 Pkt/10m | 51 Pkt/10m | 3.8 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)