This is the latest recevied telemetry packets stored in our database for station/object SP2ATJ-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746864292 | 4.16 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746863391 | 4.15 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746862489 | 4.15 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746861589 | 4.14 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746860688 | 4.13 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746859787 | 4.13 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746858885 | 4.12 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746857984 | 4.1 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746857083 | 4.06 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746856181 | 4.04 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746855280 | 4.02 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746854380 | 3.99 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746853477 | 3.98 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746852576 | 3.96 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746851675 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746850773 | 3.91 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746849872 | 3.86 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746848971 | 3.81 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746848069 | 3.78 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746847168 | 3.54 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746846267 | 3.55 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746845365 | 3.56 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746844464 | 3.57 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746843563 | 3.59 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1746842661 | 3.61 VDC | 0.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)