This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1764729770 | 0 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.08 Ampere |
| 1764727969 | 1 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | -0.01 Ampere |
| 1764726167 | 0 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.07 Ampere |
| 1764724366 | 1 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.07 Ampere |
| 1764722565 | 0 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.07 Ampere |
| 1764720763 | 1 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 4 Volt | -0.11 Ampere |
| 1764718962 | 0 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 4.1 Volt | 0.12 Ampere |
| 1764717161 | 1 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.07 Ampere |
| 1764715360 | 0 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.06 Ampere |
| 1764713558 | 0 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 4 Volt | -0.08 Ampere |
| 1764711757 | 0 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 4.1 Volt | 0.1 Ampere |
| 1764709955 | 1 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 4.1 Volt | 0.1 Ampere |
| 1764708154 | 1 Pkt/10m | 0 Pkt/10m | 4.1 Volt | 4.1 Volt | 0.1 Ampere |
| 1764706353 | 1 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.03 Ampere |
| 1764704552 | 0 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.03 Ampere |
| 1764704540 | 0 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.03 Ampere |
| 1764703283 | 1 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 4.1 Volt | 0.11 Ampere |
| 1764701482 | 6 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 4.1 Volt | 0.11 Ampere |
| 1764699680 | 0 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4 Volt | 0.03 Ampere |
| 1764697879 | 0 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.11 Ampere |
| 1764696077 | 9 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 4.1 Volt | 0.11 Ampere |
| 1764694276 | 1 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.11 Ampere |
| 1764692476 | 11 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 4.1 Volt | 0.11 Ampere |
| 1764690674 | 2 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 4 Volt | 0.11 Ampere |
| 1764688873 | 0 Pkt/10m | 0 Pkt/10m | 4 Volt | 4 Volt | 0.11 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)