This is the latest recevied telemetry packets stored in our database for station/object EA7AZH-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761388170 | 4.17 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1761387267 | 4.16 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1761382542 | 4.12 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1761381958 | 4.12 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1761366085 | 3.76 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1761362279 | 3.8 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761361378 | 3.83 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761360478 | 3.83 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761356609 | 3.86 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1761355708 | 3.87 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761351928 | 3.87 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1761351027 | 3.86 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1761347098 | 3.91 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761346197 | 3.88 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1761345297 | 3.92 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761344451 | 3.9 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761344451 | 3.92 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1761342591 | 3.93 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1761339880 | 3.93 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1761339258 | 3.94 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1761338077 | 3.94 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1761337176 | 3.91 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1761336275 | 3.95 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1761326672 | 3.97 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1761321249 | 4.07 VDC | 0.9 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)