This is the latest recevied telemetry packets stored in our database for station/object EA5KAO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1757086258 | 3.86 | 28 | 49.41 | 1018.38 | 0 |
| 1757085355 | 3.87 | 27.8 | 49.25 | 1016.63 | 0 |
| 1757084452 | 3.87 | 27.6 | 49.99 | 1017.25 | 0 |
| 1757083549 | 3.88 | 27.2 | 50.03 | 1020.13 | 0 |
| 1757081743 | 3.9 | 26.6 | 50.43 | 1019.38 | 0 |
| 1757080840 | 3.91 | 25.9 | 51.47 | 1018.88 | 0 |
| 1757079937 | 3.92 | 24.8 | 53.78 | 1018.75 | 0 |
| 1757079034 | 3.93 | 21.8 | 57.88 | 1016.13 | 0 |
| 1757079015 | 3.93 | 21.8 | 57.88 | 1016.38 | 0 |
| 1757078713 | 3.93 | 21.7 | 57.3 | 1017.63 | 0 |
| 1757078575 | 3.93 | 21.6 | 57.59 | 1017.88 | 0 |
| 1757077723 | 3.94 | 21.8 | 57.67 | 1021 | 0 |
| 1757076820 | 3.95 | 21.7 | 58.53 | 1019.88 | 0 |
| 1757075917 | 3.96 | 21.7 | 59.88 | 1019.88 | 0 |
| 1757075014 | 3.96 | 20.7 | 52.45 | 1015.63 | 0 |
| 1757074112 | 3.97 | 21.7 | 57.52 | 1017.75 | 0 |
| 1757073208 | 3.97 | 21.9 | 56.58 | 1018.88 | 0 |
| 1757072305 | 3.98 | 22 | 57.6 | 1018.88 | 0 |
| 1757070499 | 3.99 | 22.1 | 60.29 | 1019 | 0 |
| 1757069596 | 3.99 | 22.2 | 59.27 | 1019.25 | 0 |
| 1757068693 | 4 | 22.3 | 59.97 | 1020.63 | 0 |
| 1757066887 | 4.01 | 22 | 60.5 | 1017.13 | 0 |
| 1757065984 | 4.01 | 21.1 | 53.11 | 1018.13 | 0 |
| 1757065081 | 4.01 | 21.4 | 50.41 | 1020.25 | 0 |
| 1757064178 | 4.01 | 23.8 | 42.48 | 1018.5 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 0.1, -50
Value3: 0, 0.01, 0
Value4: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)