This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1764828200 | 4.17 VDC | 19.9 C | 41.89 % | 1020.38 hPa | 0 |
| 1764827297 | 4.17 VDC | 19.9 C | 41.95 % | 1018.5 hPa | 0 |
| 1764826394 | 4.17 VDC | 20.1 C | 41.39 % | 1020 hPa | 0 |
| 1764825491 | 4.17 VDC | 20.1 C | 41.54 % | 1020 hPa | 0 |
| 1764824588 | 4.17 VDC | 20.1 C | 41.49 % | 1018.25 hPa | 0 |
| 1764823685 | 4.17 VDC | 20.1 C | 41.58 % | 1020 hPa | 0 |
| 1764822782 | 4.17 VDC | 20.1 C | 41.31 % | 1019.5 hPa | 0 |
| 1764821879 | 4.17 VDC | 20.2 C | 41.25 % | 1018.13 hPa | 0 |
| 1764820976 | 4.17 VDC | 20.2 C | 41.52 % | 1021.75 hPa | 0 |
| 1764820073 | 4.17 VDC | 20.2 C | 41.34 % | 1019.5 hPa | 0 |
| 1764818268 | 4.17 VDC | 20.2 C | 41.41 % | 1019.75 hPa | 0 |
| 1764817364 | 4.17 VDC | 20.2 C | 41.29 % | 1018.38 hPa | 0 |
| 1764816461 | 4.17 VDC | 20.2 C | 41.56 % | 1020.38 hPa | 0 |
| 1764815564 | 4.17 VDC | 20.2 C | 41.16 % | 1020.13 hPa | 0 |
| 1764814660 | 4.17 VDC | 20.3 C | 41.18 % | 1022.25 hPa | 0 |
| 1764813758 | 4.17 VDC | 20.3 C | 41.41 % | 1021.63 hPa | 0 |
| 1764812849 | 4.17 VDC | 20.3 C | 41.23 % | 1021 hPa | 0 |
| 1764811947 | 4.17 VDC | 20.3 C | 41.23 % | 1020.75 hPa | 0 |
| 1764811043 | 4.17 VDC | 20.3 C | 41.02 % | 1021.25 hPa | 0 |
| 1764810140 | 4.17 VDC | 20.3 C | 41.11 % | 1019.13 hPa | 0 |
| 1764809237 | 4.17 VDC | 20.3 C | 41.14 % | 1020.38 hPa | 0 |
| 1764808335 | 4.17 VDC | 20.3 C | 40.93 % | 1023.38 hPa | 0 |
| 1764807431 | 4.17 VDC | 20.3 C | 41.22 % | 1021.25 hPa | 0 |
| 1764806528 | 4.17 VDC | 20.3 C | 40.97 % | 1022.13 hPa | 0 |
| 1764805625 | 4.17 VDC | 20.3 C | 41.12 % | 1022.25 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)