This is the latest recevied telemetry packets stored in our database for station/object IZ0DZX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1760510478 | 4.16 VDC | 27.5 C | 49.42 % | 1018 hPa | 0 |
| 1760509575 | 4.16 VDC | 27.3 C | 49.93 % | 1018.38 hPa | 0 |
| 1760508672 | 4.16 VDC | 27.2 C | 49.94 % | 1019.38 hPa | 0 |
| 1760506866 | 4.16 VDC | 27.1 C | 50.23 % | 1017.88 hPa | 0 |
| 1760505963 | 4.16 VDC | 27.1 C | 50.03 % | 1018.5 hPa | 0 |
| 1760505061 | 4.16 VDC | 27 C | 50.23 % | 1017.38 hPa | 0 |
| 1760504157 | 4.17 VDC | 27 C | 50.19 % | 1018.5 hPa | 0 |
| 1760503255 | 4.16 VDC | 27 C | 50.33 % | 1019.88 hPa | 0 |
| 1760501448 | 4.17 VDC | 27 C | 50.48 % | 1017.5 hPa | 0 |
| 1760500545 | 4.17 VDC | 27.1 C | 49.89 % | 1017.75 hPa | 0 |
| 1760499642 | 4.16 VDC | 27.2 C | 49.86 % | 1017.38 hPa | 0 |
| 1760498739 | 4.16 VDC | 27.2 C | 50.25 % | 1017.38 hPa | 0 |
| 1760497836 | 4.17 VDC | 27.2 C | 50.14 % | 1017.63 hPa | 0 |
| 1760496933 | 4.17 VDC | 27.2 C | 50.11 % | 1018.63 hPa | 0 |
| 1760496030 | 4.17 VDC | 27.2 C | 50.29 % | 1020.5 hPa | 0 |
| 1760495127 | 4.17 VDC | 27.3 C | 50.2 % | 1019.88 hPa | 0 |
| 1760494224 | 4.17 VDC | 27.3 C | 50.23 % | 1019.38 hPa | 0 |
| 1760493321 | 4.16 VDC | 27.3 C | 50.53 % | 1019.25 hPa | 0 |
| 1760492418 | 4.17 VDC | 27.3 C | 49.95 % | 1020.13 hPa | 0 |
| 1760491515 | 4.16 VDC | 27.3 C | 50.2 % | 1019.13 hPa | 0 |
| 1760490612 | 4.16 VDC | 27.3 C | 50.12 % | 1017.88 hPa | 0 |
| 1760489709 | 4.17 VDC | 27.4 C | 50.19 % | 1020.25 hPa | 0 |
| 1760488806 | 4.17 VDC | 27.4 C | 50.27 % | 1019.13 hPa | 0 |
| 1760487903 | 4.16 VDC | 27.5 C | 50.18 % | 1019.13 hPa | 0 |
| 1760487000 | 4.17 VDC | 27.5 C | 50.69 % | 1019.63 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)