This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769964324 | 4.11 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769963424 | 4.1 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1769962524 | 4.09 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1769961624 | 4.06 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769960724 | 4.04 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769959823 | 4.03 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769958923 | 4.02 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769958023 | 4.02 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769957123 | 4.02 VDC | 5.42 VDC | 0 | 0 | 0 |
| 1769956223 | 4.02 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1769955322 | 4.02 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1769954422 | 4.02 VDC | 5.18 VDC | 0 | 0 | 0 |
| 1769953521 | 4.02 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1769952621 | 4.03 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769951721 | 4.03 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769950821 | 4.03 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769949920 | 4.03 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769949020 | 4.04 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769948120 | 4.04 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769947220 | 4.04 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769946319 | 4.04 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769945419 | 4.05 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769944519 | 4.05 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769943619 | 4.05 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1769942719 | 4.05 VDC | 1.28 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)