This is the latest recevied telemetry packets stored in our database for station/object SQ8HPI-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777811725 | 4.32 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1777810822 | 4.25 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1777809922 | 4.33 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1777809022 | 4.32 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1777808127 | 4.35 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1777807222 | 4.29 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1777806322 | 4.26 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1777805422 | 4.29 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1777804522 | 4.35 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1777803622 | 4.3 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1777802722 | 4.33 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1777801822 | 4.29 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1777800926 | 4.25 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1777800022 | 4.31 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1777799122 | 4.28 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1777798218 | 4.26 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1777797322 | 4.3 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1777796417 | 4.31 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1777795522 | 4.29 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1777794626 | 4.26 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1777793730 | 4.3 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1777792817 | 4.33 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1777791918 | 4.3 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1777791017 | 4.3 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1777790117 | 4.31 VDC | 0.94 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)