This is the latest recevied telemetry packets stored in our database for station/object G1MEI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1777776676 | 3.94 VDC | 14.2 C | 41.24 % | 1010 hPa | 0 |
| 1777767651 | 4.04 VDC | 15.6 C | 42.25 % | 1012.5 hPa | 0 |
| 1777758625 | 4.06 VDC | 17 C | 42.83 % | 1012.88 hPa | 0 |
| 1777751355 | 4.19 VDC | 20.6 C | 37.57 % | 1011.25 hPa | 0 |
| 1777748685 | 4.19 VDC | 21 C | 37.44 % | 1010.88 hPa | 0 |
| 1777748099 | 4.19 VDC | 20.8 C | 35.38 % | 1009.88 hPa | 0 |
| 1777746675 | 4.19 VDC | 21.5 C | 36.76 % | 1012.38 hPa | 0 |
| 1777745127 | 4.19 VDC | 21.5 C | 36.36 % | 1010.88 hPa | 0 |
| 1777736335 | 4.19 VDC | 24.1 C | 35.4 % | 1012.13 hPa | 0 |
| 1777735423 | 4.19 VDC | 24.3 C | 37.39 % | 1014 hPa | 0 |
| 1777733952 | 4.17 VDC | 26.4 C | 34.75 % | 1011.63 hPa | 0 |
| 1777721498 | 4.09 VDC | 25.7 C | 33.33 % | 1016.13 hPa | 0 |
| 1777721210 | 4.08 VDC | 25.9 C | 34.53 % | 1017.13 hPa | 0 |
| 1777719548 | 4.05 VDC | 28.3 C | 30.12 % | 1016.38 hPa | 0 |
| 1777715094 | 3.93 VDC | 26.8 C | 30.18 % | 1016.25 hPa | 0 |
| 1777714105 | 3.88 VDC | 23.6 C | 33.44 % | 1016.75 hPa | 0 |
| 1777710243 | 3.76 VDC | 19.2 C | 37.03 % | 1017.63 hPa | 0 |
| 1777707895 | 3.75 VDC | 19.6 C | 39.34 % | 1019 hPa | 0 |
| 1777706048 | 3.54 VDC | 14.5 C | 37.35 % | 1019 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)