EA2RCF LoRa APRS MAP

My position About Go to BACKUP map Powered by EA2RCF Radioclub Foronda ☰

reset

OK4AB-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	Humidity*	BARO*	Satellite*
1769965530	27.86 C	41.61	970.6 hPa	12 V
1769965470	27.9 C	41.6	970.6 hPa	12 V
1769965410	27.97 C	41.62	970.6 hPa	12 V
1769965350	28.04 C	41.54	970.6 hPa	12 V
1769964134	27.75 C	41.78	970.7 hPa	12 V
1769964074	27.76 C	41.78	970.7 hPa	12 V
1769964014	27.77 C	41.81	970.7 hPa	12 V
1769963954	27.77 C	41.81	970.6 hPa	12 V
1769963894	27.78 C	41.82	970.6 hPa	12 V
1769963834	27.79 C	41.83	970.6 hPa	12 V
1769963774	27.79 C	41.83	970.6 hPa	12 V
1769963714	27.79 C	41.84	970.6 hPa	12 V
1769963654	27.79 C	41.86	970.6 hPa	12 V
1769963592	27.79 C	41.89	970.6 hPa	12 V
1769963532	27.79 C	41.89	970.6 hPa	12 V
1769963473	27.79 C	41.9	970.6 hPa	12 V
1769963412	27.79 C	41.91	970.6 hPa	12 V
1769963352	27.79 C	41.94	970.6 hPa	12 V
1769963292	27.79 C	41.95	970.5 hPa	12 V
1769963232	27.8 C	41.96	970.5 hPa	12 V
1769963172	27.8 C	41.97	970.5 hPa	12 V
1769963112	27.8 C	41.95	970.5 hPa	12 V
1769963052	27.8 C	41.97	970.5 hPa	12 V
1769962992	27.81 C	41.98	970.5 hPa	12 V
1769962932	27.81 C	41.95	970.5 hPa	12 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

Humidity: 0, 0.01, 0

BARO: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)