This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1769968905 | 4 VDC | -8.5 C | 73.86 % | 1016.25 hPa | 0 |
| 1769968602 | 4 VDC | -8.5 C | 74.3 % | 1015.13 hPa | 0 |
| 1769968299 | 4 VDC | -8.5 C | 74 % | 1015.88 hPa | 0 |
| 1769968002 | 4 VDC | -8.5 C | 73.62 % | 1017.5 hPa | 0 |
| 1769967699 | 4 VDC | -8.5 C | 73.12 % | 1016 hPa | 0 |
| 1769967390 | 4 VDC | -8.5 C | 73.34 % | 1016 hPa | 0 |
| 1769967087 | 4 VDC | -8.5 C | 73 % | 1017.13 hPa | 0 |
| 1769966784 | 4 VDC | -8.5 C | 72.86 % | 1016.13 hPa | 0 |
| 1769966178 | 4 VDC | -8.4 C | 72.87 % | 1014.75 hPa | 0 |
| 1769965572 | 4 VDC | -8.4 C | 72.41 % | 1015.13 hPa | 0 |
| 1769964966 | 4 VDC | -8.4 C | 71.56 % | 1016.75 hPa | 0 |
| 1769964663 | 4 VDC | -8.4 C | 71.61 % | 1015.88 hPa | 0 |
| 1769964360 | 4.01 VDC | -8.4 C | 71.13 % | 1016.5 hPa | 0 |
| 1769964057 | 4 VDC | -8.4 C | 70.15 % | 1016.63 hPa | 0 |
| 1769963754 | 4.01 VDC | -8.4 C | 69.42 % | 1017 hPa | 0 |
| 1769963451 | 4.03 VDC | -8.5 C | 67.95 % | 1016 hPa | 0 |
| 1769963148 | 4.03 VDC | -8.4 C | 66.94 % | 1015.5 hPa | 0 |
| 1769962845 | 4.03 VDC | -8.3 C | 64.44 % | 1015.5 hPa | 0 |
| 1769962542 | 4.03 VDC | -8.1 C | 61.06 % | 1014.88 hPa | 0 |
| 1769962239 | 4.03 VDC | -7.2 C | 55.42 % | 1014.25 hPa | 0 |
| 1769961936 | 4.03 VDC | -4.5 C | 45.74 % | 1015.75 hPa | 0 |
| 1769960724 | 4.03 VDC | 20.2 C | 50.3 % | 1017.38 hPa | 0 |
| 1769960118 | 4.03 VDC | 20.3 C | 48.91 % | 1017.38 hPa | 0 |
| 1769959815 | 4.02 VDC | 20.3 C | 48.89 % | 1017.38 hPa | 0 |
| 1769959512 | 4.02 VDC | 20.4 C | 49.32 % | 1017.25 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)